GI Joe Willys
Suspension Links and Spacers
RCP 5x11x4 Rubber Shielded Ball Bearing (each)
RCP Crawlers Lower Link/Shock Mounts
RCP X MIP CVD Part - 6x11x4mm Bearing
Fabrication Tab - Drilled 3mm (10 pcs.)
RCP Crawlers Lower Link/Shock Mounts SINGLE HOLE
Terms & Conditions
:: PUNK DUAL STEERING
PUNK DUAL STEERING
Dual Steering Computer
The Punk Rock Crawling Dual Steering Computer gives Dual Steering and Rear Lockout Control on the Fly. Compatible with all classes of competitions.
Check out the Dual Steering Computer Video on Punk Extras
The Punk Rock Crawling Dual Steer Computer is truly one of a kind. It gives you competition steering for any class of crawler. Just plug the PRCDSC into your receiver and your front and rear servos into the PunkRC Dual Steering Computer. It does the rest. No more thumbing with a toggle switch. Do all your steering with a single wheel. There are three steering modes selected by your transmitters 3rd (or any other extra) channel.
Mode 1, Normal Four Wheel Steering - this mode alone is worth using the PRCDSC.
Mode 2, Rear Steering Lockout – this mode is useful in competitions where rear steering is penalized. Use it only when you want.
Mode 3, Crabwalk Steering – this mode adds a new level of control.
This unit will work with any dual servo vehicle.
Also, this units will work with a three position or two position 3rd channel switch. If using a 3 way toggle, all three modes are accessible. A non-centering knob will also work. If using a 2 way toggle, the user may use a either normal and crabwalk or normal and lockout modes. This is done with a switch on the unit.
These units work great with a TQ3 radio system. It is the #1 way to convert a cheap radio into a system that has more steering functions than the fancy $350 systems. Installs in seconds.
Quantity in stock
1 item(s) available
Add to cart
Send to friend
Send to friend
Recommended products list
Customers who bought this product also bought the following products:
Hitec Standard Aluminum Servo Horn
Hobby Gear 1:24th Road Side Assistance Set #16052
RCP X MIP CVD Part - Cross Pin
XR-10 VP FRONT LINK MOUNT BLACK/BLACK
Axial 7x15mm Post (Red)(2pcs) axa1361
Robotronics Racing (short) Heavy Duty Servo Arm for Hitec
Robinson Racing 48 Pitch 20 Tooth Pinion Gear
AX30196 Axial Gear Shaft 5x58mm XR10
Axial 7x40mm Post (Green)(2pcs) axa1316
Chaotic Crawlers XR10 straight tie rod VP knuckles CC TIE STR
Select your rating...
Cart is empty
No news available at the moment
Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):
Get a different code
Copyright © 2006-2013 RCP Crawlers